1 standard cubic foot of propane = 0.1185 lb
This result depends on propane's gas density (1.899 kg/m³ at 15 °C and 1.013 bar). It is not an exact unit conversion.
Density used: 1.899 kg/m³. 15 °C and 1.013 bar.
Source: Air Liquide encyclopedia, propane.
The litre and US gallon converters use this liquid density. Standard cubic metre and standard cubic foot converters use the gas density and a condition you can change.
Liquid density is 1942 litres per tonne. This converter uses the gas density above.
Reference condition
- 15 °C and 1.013 bar: 1.899 kg/m³
- 60 °F and 14.696 psia (calculated): 1.896 kg/m³
- 0 °C and 1.01325 bar (normal cubic metre): 2.01 kg/m³
Air Liquide lists 1.8988 kg/m³ at 15 °C and 1.013 bar, and 2.01 kg/m³ at 0 °C and 1.013 bar. The converter shows at most four significant figures, so 1.8988 reads 1.899. The 60 °F option is the ideal-gas value from the 15 °C point, not a measured density. The compressibility factor at 15 °C is 0.98194, so the ideal-gas step is close rather than exact. The 0 °C option keeps 2.01 kg/m³ and states 1.01325 bar. Leave the temperature and pressure blank to keep the selected condition. A value scales that density by the ideal-gas law. Real-gas compressibility is not applied.
Formula
Mass in kilograms = density in kg/m³ × volume in cubic metres.
1 standard cubic foot is 0.02832 m³. At 1.899 kg/m³ that is 0.1185 lb.
Common sizes
| scf | lb |
|---|---|
| 1 | 0.1185 |
| 100 | 11.85 |
| 1000 | 118.5 |
| 10000 | 1185 |
Other conversions
Same conversion for another substance
Two propane densities are in use and they must not be mixed. DUKES 2025 lists liquid propane at 1942 litres per tonne at 15 °C. Litre and US gallon results use that liquid density, because those volumes are liquid in a tank. Air Liquide lists the gas at 1.8988 kilograms per cubic metre at 15 °C and 1.013 bar, and 2.01 kilograms per cubic metre at 0 °C and 1.013 bar. The 60 °F gas figure is calculated from the 15 °C point.
Updated 2026-11-20
Questions
Why are there two propane densities?
A litre or a US gallon of propane is liquid in a tank. A standard cubic metre or a standard cubic foot is gas. The liquid and gas densities are not interchangeable.
Is the 60 °F gas density a measured value?
No. Air Liquide publishes the 15 °C and 0 °C gas densities. The 60 °F figure is the ideal-gas value from the 15 °C point, at 14.696 pounds per square inch absolute.
Can the gas pressure be changed?
Yes. An optional temperature and pressure scale the selected gas density by the ideal-gas law. Air Liquide lists a compressibility factor of 0.98194 at 15 °C, so that step is close rather than exact.