1 US gallon of propane = 4.297 lb

US gal
lb

This result depends on propane's density (514.9 kg/m³, 1942 litres per tonne at 15 °C). It is not an exact unit conversion.

Density used: 514.9 kg/m³. 1942 litres per tonne at 15 °C.

Source: DUKES 2025 Annexes, average conversion factors for petroleum 2024, propane.

The litre and US gallon converters use this liquid density. Standard cubic metre and standard cubic foot converters use the gas density and a condition you can change.

This converter uses the liquid density. Gas volumes are on the standard cubic metre and standard cubic foot pages.

Formula

Mass in kilograms = density in kg/m³ × volume in cubic metres.

1 US gallon is 0.003785 m³. At 514.9 kg/m³ that is 4.297 lb.

Common sizes

US gal lb
1 4.297
5 21.49
10 42.97
15 64.46
20 85.95

Two propane densities are in use and they must not be mixed. DUKES 2025 lists liquid propane at 1942 litres per tonne at 15 °C. Litre and US gallon results use that liquid density, because those volumes are liquid in a tank. Air Liquide lists the gas at 1.8988 kilograms per cubic metre at 15 °C and 1.013 bar, and 2.01 kilograms per cubic metre at 0 °C and 1.013 bar. The 60 °F gas figure is calculated from the 15 °C point.

Updated 2026-11-20

Questions

Why are there two propane densities?

A litre or a US gallon of propane is liquid in a tank. A standard cubic metre or a standard cubic foot is gas. The liquid and gas densities are not interchangeable.

Is the 60 °F gas density a measured value?

No. Air Liquide publishes the 15 °C and 0 °C gas densities. The 60 °F figure is the ideal-gas value from the 15 °C point, at 14.696 pounds per square inch absolute.

Can the gas pressure be changed?

Yes. An optional temperature and pressure scale the selected gas density by the ideal-gas law. Air Liquide lists a compressibility factor of 0.98194 at 15 °C, so that step is close rather than exact.