1 pound of propane = 8.436 scf

lb
scf

This result depends on propane's gas density (1.899 kg/m³ at 15 °C and 1.013 bar). It is not an exact unit conversion.

Density used: 1.899 kg/m³. 15 °C and 1.013 bar.

Source: Air Liquide encyclopedia, propane.

The litre and US gallon converters use this liquid density. Standard cubic metre and standard cubic foot converters use the gas density and a condition you can change.

Liquid density is 1942 litres per tonne. This converter uses the gas density above.

Reference condition

  • 15 °C and 1.013 bar: 1.899 kg/m³
  • 60 °F and 14.696 psia (calculated): 1.896 kg/m³
  • 0 °C and 1.01325 bar (normal cubic metre): 2.01 kg/m³

Air Liquide lists 1.8988 kg/m³ at 15 °C and 1.013 bar, and 2.01 kg/m³ at 0 °C and 1.013 bar. The converter shows at most four significant figures, so 1.8988 reads 1.899. The 60 °F option is the ideal-gas value from the 15 °C point, not a measured density. The compressibility factor at 15 °C is 0.98194, so the ideal-gas step is close rather than exact. The 0 °C option keeps 2.01 kg/m³ and states 1.01325 bar. Leave the temperature and pressure blank to keep the selected condition. A value scales that density by the ideal-gas law. Real-gas compressibility is not applied.

Formula

Volume in cubic metres = mass in kilograms / density in kg/m³.

1 pound is 0.4536 kg. At 1.899 kg/m³ that is 8.436 scf.

Common sizes

lb scf
1 8.436
2 16.87
5 42.18
10 84.36
20 168.7

Two propane densities are in use and they must not be mixed. DUKES 2025 lists liquid propane at 1942 litres per tonne at 15 °C. Litre and US gallon results use that liquid density, because those volumes are liquid in a tank. Air Liquide lists the gas at 1.8988 kilograms per cubic metre at 15 °C and 1.013 bar, and 2.01 kilograms per cubic metre at 0 °C and 1.013 bar. The 60 °F gas figure is calculated from the 15 °C point.

Updated 2026-11-20

Questions

Why are there two propane densities?

A litre or a US gallon of propane is liquid in a tank. A standard cubic metre or a standard cubic foot is gas. The liquid and gas densities are not interchangeable.

Is the 60 °F gas density a measured value?

No. Air Liquide publishes the 15 °C and 0 °C gas densities. The 60 °F figure is the ideal-gas value from the 15 °C point, at 14.696 pounds per square inch absolute.

Can the gas pressure be changed?

Yes. An optional temperature and pressure scale the selected gas density by the ideal-gas law. Air Liquide lists a compressibility factor of 0.98194 at 15 °C, so that step is close rather than exact.