1 cubic metre of water = 0.9982 t

m³
t

This result depends on water's density (998.2 kg/m³, 20 °C, 1 atm (1.01325 bar)). It is not an exact unit conversion.

Density used: 998.2 kg/m³. 20 °C, 1 atm (1.01325 bar).

Source: NIST Chemistry WebBook, water at 293.15 K and 1 atm (IAPWS-95).

Liquid water at 20 °C and 1 atm. Warmer water is less dense, and this page does not apply a temperature correction.

Formula

Mass in kilograms = density in kg/m³ × volume in cubic metres.

1 cubic metre is 1 m³. At 998.2 kg/m³ that is 0.9982 t.

Common sizes

m³ t
1 0.9982
2 1.996
5 4.991
10 9.982

Pure liquid water at 20 °C and 1 atmosphere has a density of 998.21 kilograms per cubic metre in the IAPWS-95 formulation reported by the NIST Chemistry WebBook. The converter shows four significant figures, 998.2 kilograms per cubic metre, so a litre reads 0.9982 kilograms. Ice and steam are outside this figure. The converter does not change the density when the temperature changes.

Updated 2026-11-20

Questions

Why is a litre of water not exactly 1 kilogram?

The kilogram is no longer defined from water. NIST reports 998.21 kilograms per cubic metre at 20 °C and 1 atmosphere (IAPWS-95). This page shows four significant figures, 998.2 kilograms per cubic metre, so a litre reads 0.9982 kilograms. Liquid water is near 1000 kilograms per cubic metre only around 4 °C.

Does this convert a barrel of water to cubic metres?

A barrel and a cubic metre are both volumes, so that conversion does not use density. Use the barrel and cubic metre unit pages for it. This page turns a volume of water into a mass, or the other way around.

Will this stay correct for hot water?

No. The figure is only for 20 °C and 1 atmosphere. Warm water is less dense, and this page does not apply a temperature correction.